Chinese Cork Bark Elm

Chinese cork bark elm

Ulmus parvifolia 'Corticosa'

Bought as rough material in 2005. Sort of broom style or just overgrown raw stock. 

Cheap material at that time, but I have noticed much higher prices today. Elm is a magnificent material for bonsai growing. Very forgiving to hard pruning, easy to wire, and easy to grow.

This one was a bargain and so much more fun to develop it into something cool within years.

The speedy growth of Ulmus do get you faster results than with many other kind of trees or shrubs.

DSC02024
DSC02027

The trunk had one problem. It is the same thickness all the way from the surface to the top. In bonsai, it is preferred to have a decreasing thickness of the trunk up to the apex. Simply because it visually makes trees look larger than they are, and more natural because this is how they looks in nature. 

The thickest part is generally at the bottom where the tree has been growing for a longer time that at the newer at the top part.

Fist I did was removing some of the many small branches around the trunk. A mistake to some extend, because I could have used them for better low branch placement. But the tree is forgiving and I have been able to grow new ones later. Learning not to be too hasty when pruning and think ahead.

An initial styling was done in 2005, and first branches were arranged for future design. 

The first styling often is a rough sketch because as the tree develops new possibilities arise. Especially when you are not very trained it can be difficult to predict what happens in a few years of growing.

DSC03056

The uniform trunk needed to be taken care off. So I decided to carve some of the upper part so it was reduced in thickness. 

Cork Bark Elms have very soft wood so it was easily done, and they do heal over very well too.

The bark is a bit soft when young and filled with gaps and cracks. This make mosses grow very easily, and should be taken care off.

If mosses are allowed to stay on for a longer period they will attract moisture with the risk of the bark rotting away.  Or – even worse – make the tree air layer itself pushing new roots at awkward positions.

An old soft toothbrush is used to gently remove the mosses.

 

DSC03405
DSC03406

Just a good month after the first pruning the tree has set a good portion of new growth. I said it was tolerant. 🙂

New growth is cut back to divide the branches when they react on the pruning. Also here a mistake. At that time I should have let two lower branches grow freely so they could thicken properly, and be good first branches.

But you learn by mistakes, and I did manage to correct this later.

 

One year later it is time for a transplanting. Roots are pruned lightly to promote new growth.

A big enough training pot gives room for root growth and speed up the general growth.

A training pot doesn’t need to be expensive. The purpose is just for training the tree and not displaying.

2014

Again mosses have attached themselves to the tree and the toothbrush must do its work.

Branches have developed nicely over time, and the trunk has gained a much more interesting form.

2016

The branch structure is getting better. I have wasted some time on growing the lower branches thicker by letting them grow freely for a period, but that is a learning experience for the next one.

Here an early winter image still showing some leaves that haven’t gone yet. A new pot is also present.

 

2017

Summer image in all it’s glory. 

Winter work. Rearranging some branches. This is best done in the dormant period where leaves are not covering the view.

2017 summer

The pot is from Wallsall Ceramics in the UK. A bold pot in a challenging colour. Not to be liked by all but i find it great with the fresh green leaves in summer, and also having a good effect in winter with the silhouette of branches.